China Yongdes Electric Machinery Co., Ltd. was established in 1995 on the foundation of a large existing state-owned enterprise. As a tube compressor manufacturers, suppliers, factories, exporters, wholesalers, salers, dealers. One of the largest producers of pumps, compressors, tube compressor, seals and gears in China, we cooperate with a wide spectrum of OEM tube compressor and wholesale distributors. All of our products have received warm welcomes, winning great popularity both at home and abroad. If you are interested in any of our series, or have a tube compressors customized requirement to fill, please contact us now. We look forward to the opportunity of adding new members to our growing family of satisfied clients.

All tube gain circuitry with proper high-voltage plate voltages.
Solid state input and output buffering only.
14 and XLR inputs and outputs.
Calibrated, accurate meters.
Smooth, lively tube sound.
THE "BELLARI" Studio Tube Compressor/Limiter Features Solid State Input and Output Buffering Only, 1/4" and XLR Inputs and Outputs, Calibrated, Accurate Meters, Side Chain For Direct Access To Detector Circuits and A Smooth, Lively Tube Sound. The valves are General Electric ECC83/12AX7A types, run from a stabilized 250v DC power supply. The first valve stage acts as a voltage amplifier, with the second stage forming part of the gain control element. The gain control is performed by TL Audio's own unique transconductance stage that avoids the use of VCAs, thus improving transparency and minimizing distortion, which is virtually constant at 0.05% over the full bandwidth. The frequency respo. Additionally, The optical gain unit does not experience any degradation over the long term, providing nearly infinite life. The amplifier is based on two tubes (dual triodes) in push-pull configuration (one ECC 83 as a differential amplifier, and one ECC 82 as the output stage), and an output transformer. The power supply for the differentia...

2-channels of soft knee, variable-ratio compression
Balanced mic and line level inputs
Balanced line outputs, switchable for -10dB or +4dB operation
Unbalanced jack I/O connections
Stereo front panel instrument inputs with gain control and sensitivity switch (for guitar or keyboards etc.). The TL Audio C-1 compressor maintains its position among the most flexible, polished-sounding high-end compressors on the market today. Featuring a spectacular raven blue 6mm milled aluminum front panel, General Electric US military-specification valves, high retention gold-plated ceramic valve bases and circular back-lit VU meters, the C-1 is even fatter sounding and more rugged than its legendary predecessor.All controls are continuously variable (unlike some other compressors with switched parameters) and high-quality onboard mic preamps allow direct-to-tape recording of microphone sources. Stereo front panel instrument inputs mean a keyboard or guitar can feed straight into the C-1 and down to tape with a minimum of fuss. Whether the C-1 compressor is tracking vocals and instruments or adding roundness and warmth to a complete mix, it will become an indispensable part of your signal path within hours.The TL Audio C-1 features a low-noise solid state preamp followed by two valve stages per channel.