China Yongdes Electric Machinery Co., Ltd. was established in 1995 on the foundation of a large existing state-owned enterprise. As a bevel gear manufacturers, suppliers, factories, exporters, wholesalers, salers, dealers. One of the largest producers of pumps, compressors, bevel gear, seals and gears in China, we cooperate with a wide spectrum of OEM bevel gear and wholesale distributors. All of our products have received warm welcomes, winning great popularity both at home and abroad. If you are interested in any of our series, or have a bevel gears customized requirement to fill, please contact us now. We look forward to the opportunity of adding new members to our growing family of satisfied clients.

Material: 42CrMo, 20CrMnMo, 20Cr2Ni4, 35CrMo, 20CrMnTi and other high intensity alloy steel
Tooth flank carburization and nitrification, with rigidity of HRC58-62
Gear precision: Grade VI
Size:diameters from 5-500mm,module 2.5 up 12.5
gear wheels machining according to customers' drawings and raw materials available
Packing: wooden cases or as per customers' requirements
Where two axles cross at point and engage by means of a pair of conical gears, the gears themselves are referred to as bevel gears. These gears enable a change in the axes of rotation of the respective shafts, commonly 90°. A set of four bevel gears in a square make a differential gear, which can transmit power to two axles spinning at different speeds, such as those on a cornering automobile.

1) Material: 42CrMo, 20CrMnMo, 20Cr2Ni4, 35CrMo, 20CrMnTi and other high intensity alloy steel
2) Tooth flank carburization and nitrification, with rigidity of HRC58-62
3) Gear precision: Grade V
There are four basic types of bevel gears- Straight bevel gears: These gears have a conical pitch surface and straight teeth tapering towards an apex.Zero bevel gears: This is similar to a bevel gear except the teeth are curved. In essence, Zero Bevel Gears are Spiral Bevel Gears with a spiral angle of zero Spiral bevel gears: The teeth are curved teeth at an angle allowing too contact to be gradual and smooth.Hypoid bevel gears: These gears are similar to spiral bevel except that the pitch surfaces are hyperboloids rather than cones. Pinion can be offset above or below gear center, thus allowing larger pinion diameter, and longer longer life and smoother mesh, with additional ratios e.g., 6:1, 8:1, 10:1.The design of bevel gears results in thrust forces away from the apex. With the bearing limitations the gears have to be carefully designed to ensure that they are not thrown out of alignment as they are loaded.